x
Send Your Inquiry Today
Quick Quote
Clear waterproof PE pallet cover covering concrete block pallet for outdoor storage

PE Pallet Covers

Goyopak manufactures PE (polythene) pallet covers to your load dimensions, with thickness, color, printing, and packing set for your order.

Full top-and-side coverage
Full top-and-side coverage
Covers your load from the top and all four sides.

Short-term reuse
Short-term reuse
Inspect the cover after each use and reuse it only while it remains undamaged.

Start from your load size
Start from your load size
Share dimensions or a photo to receive a specification.

  • blue tinted pallet hood cover for palletized boxes
  • black PE pallet hood cover on wooden pallet
  • clear pallet cover bag covering stacked carton boxes
  • large customized white pallet hood cover unfolding
  • square bottom PE pallet cover bag demonstration
  • high clarity PE pallet cover film transparency
  • pallet cover blown film extrusion manufacturing
  • pallet cover film roller winding and converting
  • blue tinted pallet hood cover for palletized boxes
  • black PE pallet hood cover on wooden pallet
  • clear pallet cover bag covering stacked carton boxes
  • large customized white pallet hood cover unfolding
  • square bottom PE pallet cover bag demonstration
  • high clarity PE pallet cover film transparency
  • pallet cover blown film extrusion manufacturing
  • pallet cover film roller winding and converting

Coverage for the whole load

Goyopak makes PE pallet covers to fit your loaded pallet dimensions, covering the top and all four sides of the palletized load. We determine the cover length, width, and height based on your loaded pallet dimensions, so the cover provides the coverage your load requires.

It adds an external protective layer that helps protect goods from dust, dirt, and incidental moisture during storage, handling, and transport.

The cover film does not secure the load in place. Use it with stretch film or straps when load securing is needed.

Specified from your load, not from a size chart

Goyopak determines the cover specification based on your load length, width and height, together with the required cover drop. We manufacture covers for different pallet sizes (e.g., EUR 1200 × 800 mm, UK 1200 × 1000 mm, and US 48 × 40 in).

When selecting a cover, consider the combined height of the pallet and loaded goods, along with the required cover drop, to determine the appropriate cover dimensions.

Examples of our previously produced gusseted pallet covers include:

1270(L) × 1067(W) × 967(H) mm — for loads on 1200 × 800 mm pallets

1270(L) × 1230(W) × 1185(H) mm — for loads on 1200 × 1000 mm pallets

clear pallet top cover bag and roll on pallet warehouse background


These are examples of previous production sizes, not fixed restrictions. Custom dimensions are available to suit your actual load requirements.

Configured and supplied for your packing line

You can specify size, color, printing, and packing to suit your order. These covers are made from PE blown film, with thickness options ranging from 25 to 200 micrometers. Thickness is selected according to your load and application.

CO
Color
Clear, black, white, or custom

PR
Printing
Custom printing can be specified

PCR
PCR
PCR content available

PK
Packing
Carton, bubble wrap, or plastic bag

The stated thickness range, PCR formulation option, and packing options apply to both gusseted pallet hoods and flexible PE pallet caps.

Two pallet cover types

Gusseted pallet hood
gusseted pallet cover bag dimension diagram
Legend: L = Hood Drop Length, W = Hood Flat Width, G = Gusset, D = Opening Depth
• Single covers
• Perforated roll (3 in / 76 mm core)
Goyopak manufactures gusseted pallet hoods. The gusseted construction allows the hood to expand around the palletized load, providing top-and-side coverage. Hoods are made to the required load dimensions.

Flexible PE pallet cap
PE square top pallet cover bag dimensions L W H
Legend: L = Cap Length, W = Cap Width, H = Cap Height
• Single covers
Goyopak flexible PE pallet caps are made with separate side panels heat-sealed to the top panel. This construction provides top-and-side coverage around the palletized load. Each cap is made to the required dimensions.

Short-term reuse

clean heavy duty white waterproof PE pallet cover bag for construction materials

PE pallet covers can be reused for a short period when they remain clean and undamaged after use. Actual reuse depends on load conditions, handling, and the condition of the cover.
Conditions for Reuse
Goyopak recommends reusing a cover only under these conditions:
  • Load condition:
    Avoid sharp edges or protrusions that could puncture or tear the film.
  • Handling condition:
    Avoid severe wind abrasion or rough handling that could damage the cover.
  • Cleanliness:
    Reuse only when the cover remains clean and suitable for its intended application.
Inspect After Each Use
Check the cover for tears, punctures, damaged areas, or contamination. Replace it when damage or contamination makes it unsuitable for further use.

Special requirements

  • UV resistant PE pallet cover for outdoor timber firewood storage
    Outdoor or UV exposure

    PE pallet covers are available with UV-resistant properties for outdoor storage and exposure to sunlight.

    Discuss a Special Requirement
  • transparent PE pallet cover bag for boxed food storage
    Food-related use

    PE pallet covers can be made with material options selected for food-related packaging applications and requirements.

    Discuss a Special Requirement
  • PE pallet cover roll on the green steel dispenser rack
    Dispenser use

    PE pallet covers can be supplied as rolls with perforated easy-tear lines for use with compatible dispensing devices.

    Discuss a Special Requirement

Manufacturing and quality control

Goyopak manufactures PE pallet covers in-house, from blown-film extrusion through forming, heat sealing, cutting, folding, packaging, and final inspection. Custom printing is available as an optional step before forming, depending on order requirements.

We set film thickness and width during extrusion, and add color during resin blending. Finished cover dimensions are determined during forming and cutting to your confirmed order specifications.

packaged PE pallet cover rolls in manufacturing quality control

PE pallet covers and related products

 

A PE pallet cover, a Top Sheet, Stretch Film, and a Stretch Hood serve different roles around a palletized load.
Product Coverage Main task Handling Usually paired with
PE Pallet Cover Top and all four sides External protection for the load Pull down over the load Stretch Film when load securing is needed
Top Sheet Top surface Top-surface protection Place over the load Stretch Film or straps
Stretch Film Around the load Load securing and stabilization Wrap around the load Top Sheet or pallet cover, if needed
Stretch Hood Top and all four sides Load securing and external protection Stretch over the load using a machine Usually used alone
A PE pallet cover does not secure the load in place, and it is not airtight or completely waterproof packaging.
Explore More Goyopak Products:
1. Can you match the pallet cover we use now?

Send your current specification, photo, or sample. Goyopak reviews it and proposes a matching specification.

2. Do you supply shrink pallet hoods?

Yes. Goyopak supplies shrink pallet hoods. Contact Sales for details.

Request a Quote for PE Pallet Covers

Share your palletized load and cover requirements. Goyopak’s team will review the information and prepare a quotation. If you are unsure which cover type or specification suits your load, send the details you have and Goyopak’s team can help you identify a suitable option.

Helpful information to include:

  • Load dimensions or pallet size
  • Estimated quantity
  • Current cover specification or photos
  • Special requirements, such as UV exposure, PCR content, or custom printing

Optional details can be left blank and provided later.

Send Your Inquiry Today
PE Pallet Covers CTA
Scroll to Top